WIND TURBINE SIMULATION AND CONTROL USING SQUIRREL-CAGE INDUCTION GENERATOR FOR DFIG WIND ENERGY CONVERSION SYSTEMS

Document Type : Original research articles

Authors

1 Department of Electrical Engineering, College of Engineering, Majmaah University, Almajmaah 11952, Saudi Arabia

2 Department of Electrical Engineering, College of Engineering, Assuit University, Assuit 71515, Egypt

3 Electrical Engineering Department, Sohag University, 82524, Sohag, Egypt

Abstract

This work presents the design and implementation of a wind turbine simulator to carry out laboratory tests on the generation, regulation, and control of a wind power conversion system (WECS) with a capacity of 3 kW. A three-phase squirrel-cage induction motor emulates the static and dynamic wind turbine characteristics based on the torque-speed profile of a wind turbine. The Emulator allows all electromechanical tests to be carried out, from the characterization of the generator to the adjustment of controls and protections for equipment operating in a specific location. Initial Emulator tests were successful.

Keywords


[1]      A. G. Abo-Khalil, “Impacts of wind farms on power system stability,” in Wind Farm, ISBN 980-953-307-562-9, 2013.
[2]      A. G. Abo-Khalil and D. C. Lee, “Grid connection of doubly-fed induction generators in wind Energy conversion system,” Power Electronics and Motion Control Conf. Proc., 2006, 2, 1–5.
[3]      F. Martinez, L. C. Herrero, and S. D. Pablo, “Open-loop wind turbine emulator,” Renew. Energ., 2014, 63, 212–221.
[4]      M. Arifujjaman,” Emulation of a small wind turbine system with a separately-excited dc machine. IU-Journal of Electrical & Electronics Engineering, 8(1), 2012, 569-579.
[5]      Ahmed G. Abo-Khalil, Ali M Eltamaly, P. R. Praveen, Ali S. Alghamdi, I. Tlili, “A Sensorless Wind Speed and Rotor Position Control of PMSG in Wind Power Generation Systems”, Sustainability 12 (20), 8481, October, 2020.
[6]      Ahmed G. Abo-Khalil, “Control system of DFIG for Wind Power Generation Systems,” LAP LAMBERT Academic Publishing, ISBN-10: 3659649813, ISBN-13: 978-3659649813, 2015.
[7]      F.-J. Lin, L.-T. Teng, P.-H., Hieh, Y.-F. Li,” Intelligent controlled-wind-turbine emulator and induction-generator system using RBFN,” IEE Proceeding on Electric Power Applications, 2006.
[8]      L. Yang, S. Yan, Z. Chen, W. Liu,” A novel wind turbine simulator for wind energy conversion systems using an permanent magnet synchronous motor,” International Conference on Electrical Machines and Systems (ICEMS), 2013.
[9]      D. Dolan and P. Lehn, “Simulation model of wind turbine 3p torque oscillations due to wind shear and tower shadow,” IEEE Transactions on Energy Conversion, 2006, 21(3), pp. 717–724.
[10]   H. M. Kojabadi, L. Chang, and T. Boutot, “Development of a novel wind turbine simulator for wind energy conversion systems using an inverter-controlled induction motor,” IEEE T. Energy. Conver., 2004, 19, 547–552.
[11]   A. Sokolovs, L. Grigans, E. Kamolins, J. Voitkans, “ An Induction Motor Based Wind Turbine Emulator,” Latvian Journal of Physics and Technical Sciences, 51(2), 2014, 11-21.
[12]   A. G. Abo-Khalil and D. C. Lee, “MPPT control of wind generation systems based on estimated wind speed using SVR,” IEEE Transactions on Industrial Electronics, 2008, 55(3), 1489–1490.
[13]   A. G. Abo-Khalil, H. G. Kim, D. C. Lee, and J. K. Seok, “Maximum output power control of wind generation system considering loss minimization of machines,” IEEE IECON Conf. Proc., 2004, 1676–1681.
[14]   L. Mihet-Popa, F. Blaabjerg, and I. Boldea, “Wind turbine generator modeling and simulation where rotational speed is the controlled variable,” IEEE T. Ind. Appl., 2004, 40, 3–10.
[15]   Ahmed G. Abo-Khalil and Hammad Ab-Zied, “Sensorless Control for DFIG Wind Turbines Based on Support Vector Regression,” Industrial Electronics Conference IECON, Canada, Oct.  2012.
[16]   A. Sajadi, Ł. Rosłaniec, and M. Kłos, “An emulator for fixed pitch wind turbine studies.” Renew. Energ., 2016, 87, 391–402.
[17]   F. M. Hughes, O. Anaya-Lara, and G. Ramtharan, “Influence of tower shadow and wind turbulence on the performance of power system stabilizers for DFIG-based wind farms,” IEEE T. Energy. Conver., 2008, 23, 519–528.
[18]   A. M. Eltamaly, M. S. Al-Saud, Khairy Sayed, Ahmed G. Abo-Khalil,” Sensorless Active and Reactive Control for DFIG Wind Turbines Using Opposition-Based Learning Technique”, Sustainability 12 (9), 3583, April 2020.
[19]   J. Tan, W. Hu, X. Wang, “Effect of tower shadow and wind shear in a wind farm on AC tie-line power oscillations of interconnected power systems,” Energies, 2013, 6, 6352–6372.
[20]   A. G. Abo-Khalil and H. Abo-Zied, “Sensorless control for dfig wind turbine based on support vector regression,” in IECON 2012 38th Annual Conference on IEEE Industrial Electronics Society, IEEE, 2012, 3475–3480.
[21]   A. G. Abo-Khalil and D. C. Lee, “MPPT control of wind generation systems based on estimated wind speed using SVR,” IEEE Transactions on Industrial Electronics, 2008, 55(3), 1489–1490.
[22]   A. G. Abo-Khalil, “Model-based optimal efficiency control of induction generators for wind power systems,” IEEE International Conference on Industrial Technology (ICIT), 2011, 191–197.
[23]   A. G. Abo-Khalil, “Synchronization of DFIG output voltage to utility grid in wind power system,” Elsevier Journal of Renewable Energy, 2012, 44, pp. 193–198.
[24]   J. F. Manwell, J. G. McGowan, and A. L. Rogers, Wind Energy Explained: Theory, Design and Application, Wiley, 2010.
[25]   A. G. Abo-Khalil, D.C. Lee,” SVR-based wind speed estimation for power control of wind energy generation system,” In Proceeding of Power Conversion Conference; IEEE, Nagoya, Japan, 2007, pp. 1431-1436.
[26]   Ahmed G. Abo-Khalil, Saeed Alyami, Khairy Sayed, Ayman Alhejji,” Dynamic Modeling of Wind Turbines Based on Estimated Wind Speed under Turbulent Conditions,”  Energies, 12(10), PP. 1907, 2109.
[27]   I. M. Gregory, R. S. Chowdhry, J. D. McMinn, and J. D. Shaughnessy, “Hypersonic vehicle model and control law development using and  synthesis,” NASA Technical Memorandum 4562, Oct. 1994.
[28]   A. G. Abo-Khalil, H. G. Kim, D. C. Lee, and J. K. Seok, “Maximum output power control of wind generation system considering loss minimization of machines,” IEEE IECON Conf. Proc., 2004, 1676–1681.
[29]   S. N. Vukosavic and E. Levi, “Robust DSP-based efficiency optimization of a variable speed induction motor drive,” IEEE Trans. Ind. Electron., 2003, 50(3), 560–570.
[30]   Ahmed G. Abo-Khalil and D. C. Lee, “Maximum power point tracking based on sensorless wind speed using support vector regression,” IEEE Transactions on Industrial Electronics, Vol. 55, No. 3, March 2008.
[31]   K. R. Cho, J. K. Seok, and D. C. Lee, “Mechanical parameter identification of servo systems using robust support vector regression,” IEEE PESC Conf. Proc., 2004, 5, 3425–3430.
[32]   H. G. Park, A. G. Abo-Khalil, D. C. Lee, and K. M. Son, “Torque ripple elimination for doubly fed induction motors under unbalanced source voltage,” Proc. Power Electronics and Drive Systems (PEDS), 2007, 7, 1301–1306.
[33]   A. G. Abo-Khalil, H. G. Park, and D. C. Lee, “Loss minimization control for doubly fed induction generators in variable speed wind turbines,” Proc. IECON ’07, 2007, 1109–1114.
[34]   Ahmed G. Abo-Khalil, A. Alghamdi, I.  Tlili, A, Eltamaly, “A. Current Controller Design for DFIG-based Wind Turbines Using State Feedback Control,” IET Renewable Power Generation, 13 (11), pp. 1938-1949, 2019.
[35]   Ahmed G. Abo-Khalil, A. S. Alghamdi, A. M. Eltamaly, M. S. Al-Saud, P. R. Praveen, K. Sayed,” Design of State Feedback Current Controller for Fast Synchronization of DFIG in Wind Power Generation Systems,” Energies 12 (12), pp. 2427, 2019.
[36]   A. M. Eltamaly, M. S. Al-Saud, Ahmed G. Abo-Khalil,” Dynamic Control of a DFIG Wind Power Generation System to Mitigate Unbalanced Grid Voltage,” IEEE Access, February 2020.
[37]   A. G. Abo-Khalil and D-C Lee, “Grid connection of doubly-fed induction generators in wind Energy conversion system,” Power Electronics and Motion Control Conf. Proc., vol. 2, pp. 1-5, 2006.
[38]   A. G.  Abokhalil,” Grid Connection Control of DFIG for Variable Speed Wind Turbines under Turbulent Conditions,” International Journal of Renewable Energy Research (IJRER) 9 (3), pp. 1260-1271, 2019.
[39]   H. K. Kim, Ahmed Abo-Khalil, D. C. Lee, and J. K. Seok, " Grid-Connected Wind Power Generation System Using Cage-Type Induction Generators," Proc. of Korean Institute of Power Electronics Conf., pp. 73-76, 2003.
[40]   Ahmed G. Abo-Khalil and D. C. Lee “Synchronization of Wind power Generation System using DFIG to Utility Grid”, Proc. of Korean Institute of Power Electronics Conf., pp. 91-95, Nov. 2005.
[41]   Ahmed G. Abo-Khalil and D. C. Lee “Optimal Efficiency Control of Wind Generation System Using Fuzzy Logic Control,” Proc. Korean Institute of Electrical Engineering Conf., July 2005.
[42]   Ahmed Abo-Khalil and D. C. Lee, "Wind Turbine Simulator Including Pitch Angle Control, Shaft Torsional Vibration and Tower Effect ", Proc. Korean Institute of Electrical Engineering Conf., pp. 411-413, 2005.
[43]   Ahmed G. Abo-Khalil and D. C. Lee “Output Power Control of Wind Generation System using Estimated Wind Speed by Support Vector Regression”, Proc. of Korean Institute of Power Electronics Conf., pp. 345-348, June 2006.
[44]   Ahmed G. Abo-Khalil and D. C. Lee, "Implementation of Grid-Connection of DFIG for Wind power Generation system," Proc. Korean Institute of Electrical Engineering Conf. Oct. 2006.
[45]   Ahmed G. Abo-Khalil, D. C. Lee, J. K. Seok, " Variable Speed Wind Power Generation System Based on Fuzzy Logic Control for Maximum Output Power Tracking ," Proc. Power Electronics Specialists Conference’04, pp. 2039-2043, 2004.
[46]   Ahmed G. Abo-Khalil and D. C. Lee “Loss Minimization Control for Induction Generator in Wind Power Systems using Support Vector Regression”, Proc. of Korean Institute of Power Electronics Conf., pp. 341-344, April 2006.
[47]   Ahmed G. Abo-Khalil and D. C. Lee, " Grid Connection of Doubly-Fed Induction Generators in Wind Energy Conversion," Proc. IPEMC, China, August 2006.
[48]   Ahmed G. Abo-Khalil, H. G. Kim, D. C. Lee and J. K. Seok, " Maximum Output Power Control of Wind Generation System Considering Loss Minimization of Machines ," Proc. IECON’04, pp. 1676 - 1681, 2004.
[49]   Ahmed G. Abo-Khalil and D. C. Lee, "Dynamic Modeling and Control of Wind Turbines for Grid-Connected Wind Generation System," Proc. Power Electronics Specialists Conference, PESC, Korea 2006.
[50]   Ahmed G. Abo-Khalil, H.-G. Park and D. C. Lee and "Loss Minimization Control for Doubly-Fed Induction Generators in Variable Speed Wind Turbines," Proc. IECON’07, pp. 1109 - 1114, Nov. 2007.
[51]   H. G. Park, Ahmed G. Abo-Khalil, D. C. Lee,” Wind turbine simulators considering turbine dynamic characteristics,” The Transactions of The Korean Institute of Electrical Engineers 57 (4), pp. 617-624, 2008.
[52]   Ahmed G. Abo-Khalil “A New Wind Turbine Simulator using a Squirrel-Cage Motor for Wind Power Generation Systems " The Power Electronics and Drive Systems Conference PEDS, December 2011, Singapore.